Providing Out-of-Band Connectivity to Mission-Critical IT Resources

Opengear Alternatives: Replacing the ACM7000 Resilience Gateway

OpenGearAlternatives
A gateway router is a crucial device for connecting remote IT deployments—such as retail stores, branch offices, or edge data centers—to the primary enterprise network. In this blog, we’ll review Opengear’s ACM line of gateway routers and explain their key features and limitations. In addition, we’ll discuss some Opengear alternatives that provide greater customization, control, and functionality.

The Opengear ACM7000 Resilience Gateway

The Opengear ACM7000 is a compact form-factor network gateway and console server for small remote and edge deployments. The ACM7000 integrates with Opengear’s Lighthouse software for centralized management and some automation capabilities. Out-of-band management is provided via the Smart OOBTM feature, with failover to an embedded 4G LTE cellular modem or an optional dial-up PSTN modem.

The Opengear ACM7000 combines gateway routing features with terminal server capabilities, enabling you to reduce the number of devices in your small remote deployments. The ACM7000 comes with 4-8 Cisco pinout serial ports and 4 USB 2.0 console ports, as well as 2 Digital I/O (DIO) ports and 2 High Voltage Digital Outputs (HVDO). Gateway router features include a stateful firewall, DHCP server, DDNS, and IP filtering.

The ACM7000’s auto-response feature allows you to write custom scripts that are triggered by specific events such as power failures, environmental sensor alarms, or network outages. These scripts can alert administrators to problems and in some cases remediate issues without human intervention.

Opengear ACM7000 key features

  • Smart OOBTM management
  • Centralized management through Opengear Lighthouse
  • Integrations with Nagios NSCA & NRPE
  • Link Layer Discovery Protocol (LLDP) automatic device discovery
  • Failover to embedded 4G LTE cellular modem
  • SSL and IPsec VPN
  • Stateful firewall with IP filtering and port forwarding
  • Automatic monitoring, detection, and recovery from equipment faults

Opengear ACM7000 limitations

The Opengear ACM7000 is what’s known as a 2nd generation, or Gen 2, OOB device. That means it provides reliable out-of-band management access and some automation capabilities for individual tasks and workflows. However, the ACM’s automation is limited to a handful of supported integrations, specific scripting languages, and Lighthouse playbooks.

Some additional automation functionality—such as end-device zero-touch provisioning (ZTP)—is only available through upgraded versions of Opengear’s Lighthouse management software. This makes it challenging to fully automate and orchestrate remote network infrastructure, which is crucial for NetDevOps transformation.

In addition, the ACM7000 only goes part of the way towards consolidating your remote network infrastructure. It combines gateway routing and OOB terminal server capabilities, with an option to add a 4-port Ethernet switch in the 7004-5 models. The Opengear ACM does not include built-in functionality for SD-WAN (software-defined wide area networking), though it has the ability to work with third-party SD-WAN architectures. It also doesn’t support hosting for applications, VMs, or containers, which means you’ll need additional hardware for things like edge computing and next-generation firewall (NGFW) software hosting.

To get full end-to-end automation of remote and edge network deployments while consolidating your tech stack and reducing operational complexity, you need a Gen 3 OOB gateway like the Nodegrid line of services routers from ZPE Systems.

Opengear alternatives: Nodegrid Services Routers

Nodegrid Services Routers, or SRs, are vendor-neutral, all-in-one branch networking solutions. Nodegrid delivers secure out-of-band management access via your choice of high-speed 5G/4G LTE cellular, Wi-Fi, and/or dial-up modem. Nodegrid hardware runs on the Linux-based, x86-64bit Nodegrid OS to ensure easy integrations with third-party software, including automation and orchestration tools like Puppet, Chef, Ansible, and RESTful APIs. Plus, the ZPE Cloud management platform provides centralized, web-based management of your multi-vendor environments.

Nodegrid’s vendor-agnostic platform enables true NetDevOps hyperautomation, which is the ability to fully automate every task and workflow without compromise. That means more efficient management of remote, edge, and branch locations.

Plus, Nodegrid SRs are complete branch-in-a-box solutions, rolling up all your remote network technology into one compact device. For example, the Nodegrid Hive SR is a multi-function box that delivers gateway routing, SD-WAN, Wi-Fi, secure OOB, end-device ZTP, and VM/container/VNF (virtual network functions) hosting for small edge and branch deployments. Another option for more customized and scalable functionality is the modular Nodegrid Net SR (or NSR), which allows you to extend your solution with expansion modules for additional serial, Ethernet, USB, PoE+, and SFP ports as well as storage and compute modules.

Nodegrid Services Routers key features

  • Strong out-of-band management integration
  • Extensible applications with virtualization and containers
  • Zero Touch Provisioning (ZTP) over the WAN for fast and easy remote setup
  • Centralized, vendor-neutral management through ZPE Cloud and Nodegrid Manager solutions
  • Modern, open-architecture x86-64bit Linux Kernel with fast security patching
  • Failover to 5G/4G/LTE and Wi-Fi
  • SSL VPN & Secure Tunnel
  • DHCP server with extra IP addresses for remote site, or replace current router altogether
  • Embedded firewall with IP packet and security filtering, IP forwarding support
  • Selectable encrypted cryptographic protocols & cyber suite levels
  • Power control and monitoring to get alerts on device health and solve problems automatically
  • Orchestration support via Puppet, Chef, Ansible, RESTful

Nodegrid SR models and use cases

  • Nodegrid Net SR (NSR): Scalable and customizable for any use case, including data center and large branch deployments
  • Nodegrid Bold SR: Versatile all-in-one networking and terminal server functionality at edge and branch locations
  • Nodegrid Gate SR: Up to 10 types of managed interfaces for enhanced flexibility in branch and edge deployments
  • Nodegrid Hive SR: Branch-in-a-box capabilities in a compact device for distributed branch and edge sites

Nodegrid SRs are an alternative to Opengear ACM7000 gateways for organizations that need vendor freedom, end-to-end remote network automation, and consolidated technology stacks. With the Nodegrid solution, you get a unified network automation and orchestration platform from which to deploy, monitor, and control your distributed network architecture.

Learn more about remote, branch, and edge networking:

→   How to Choose the Best Branch Office Connectivity Solution for Your Network
→   Why Out-of-Band Remote Access is Critical for Branch Networking
→   Simplifying Network Edge Orchestration With a Single Platform
→   How to Use a Cloud Managed Gateway Router to Optimize OT Automation

Still curious about Opengear alternatives?

To see Opengear alternatives in action, contact ZPE Systems to watch a Nodegrid demo.

Request a Demo Today

Opengear ACM7000 product SKUs

Product SKU Description
ACM7004-2-L 4 serial Cisco Straight pinout, ext power, dual 1 GbE Ethernet, Global 4G LTE-A Pro cellular, 2 DIO and 2 output ports
ACM7004-2-LMP 4 serial Cisco Straight pinout, ext power, dual 1 GbE Ethernet, 4G LTE-A Pro cellular, 2 DIO and 2 output ports
ACM7004-5-L 4 serial Cisco Straight pinout, ext power, 1 GbE Ethernet or fiber SFP, 4 port GbE switch, Global 4G LTE-A Pro cellular, dual SIM, 2 DIO and 2 output ports, global power adapter
ACM7004-5-LMP 4 serial Cisco Straight pinout, ext power, 1 GbE Ethernet or fiber SFP, 4 port GbE switch, 4G LTE-A Pro cellular, dual SIM, 2 DIO and 2 output ports, global power adapter
ACM7008-2-L 8 serial Cisco Straight pinout, ext power, dual 1 GbE Ethernet, Global 4G LTE-A Pro cellular, 2 DIO and 2 output ports, global power adapter
ACM7008-2-LMP 8 serial Cisco Straight pinout, ext power, dual 1 GbE Ethernet, 4G LTE cellular, dual SIM, 2 DIO and 2 output ports, global power adapter
ACM7004-2 4 serial Cisco Straight pinout, ext power, dual 1 GbE Ethernet, 4 USB console ports, 2 DIO and 2 output ports, global power adapter
ACM7004-2-M 4 serial Cisco Straight pinout, ext power, dual 1 GbE Ethernet, 4 USB console ports, PSTN modem, 2 DIO and 2 output ports
ACM7004-5 4 serial Cisco Straight pinout, ext power, 1 GbE Ethernet or fiber SFP, 4 port GbE switch, 2 DIO and 2 output ports, global power adapter
ACM7008-2 8 serial Cisco Straight pinout, ext power, dual 1 GbE Ethernet, 4 USB console ports, 2 DIO and 2 output ports, global power adapter
ACM7008-2M 8 serial Cisco Straight pinout, ext power, dual 1 GbE Ethernet or fiber SFP, 4 USB console ports, PSTN modem, 2 DIO and 2 output ports, global power adapter

 

Nodegrid Net Services Router (NSR) product SKUs

Product SKU Description
NSR-TOP1-DAC 1 RS-232 serial, 1 USB 3.0 console port, 2 USB 2.0 console ports, dual 1GbE Ethernet, dual SFP+ Ethernet, 1 HDMI port, on-board switch, 5 slots, dual AC power
NSR-BASE-DAC 1 RS-232 serial, 1 USB 3.0 console port, 2 USB 2.0 console ports, dual 1GbE Ethernet, dual SFP+ Ethernet, 1 HDMI port, on-board switch, 5 slots, dual AC power
NSR-LITE-DAC 1 RS-232 serial, 1 USB 3.0 console port, 2 USB 2.0 console ports, dual 1GbE Ethernet, dual SFP+ Ethernet, 1 HDMI port, 5 slots, dual AC power
NSR-TOP1-SAC 1 RS-232 serial, 1 USB 3.0 console port, 2 USB 2.0 console ports, dual 1GbE Ethernet, dual SFP+ Ethernet, 1 HDMI port, on-board switch, 5 slots, single AC power
NSR-TOP1-SAC-POE 1 RS-232 serial, 1 USB 3.0 console port, 2 USB 2.0 console ports, dual 1GbE Ethernet, dual SFP+ Ethernet, 1 HDMI port, on-board switch, 5 slots, single AC and PoE power
NSR-BASE-SAC-POE 1 RS-232 serial, 1 USB 3.0 console port, 2 USB 2.0 console ports, dual 1GbE Ethernet, dual SFP+ Ethernet, 1 HDMI port, on-board switch, 5 slots, single AC and PoE power
NSR-16ETH-EXPN NSR 16 port 1GbE Ethernet expansion card
NSR-8ETH-POE-EXPN NSR 8 port 1GbE Ethernet with PoE+ expansion card
NSR-16SRL-EXPN NSR 16 port RJ45 Serial Rolled expansion card
NSR-16USB-EXPN NSR 16 port USB Type A expansion card
NSR-8SFP-EXPN NSR 8 port 1GbE SFP expansion card
NSR-16SFP-EXPN NSR 16 port 1GbE SFP expansion card
NSR-DISK-EXPN NSR Storage expansion card
NSR-COMP-EXPN NSR Compute 4-core, 8GB DDR4, 32GB SATA expansion card
NSR-M2-EXPN NSR M.2 / SATA expansion card
NSR-COVER Accessory: NSR Cover Plate
M2-WIFI Accessory: M.2 Wi-Fi
M2-CELL Accessory: M.2 Cellular – Dual SIM
M2-S064 Accessory: M.2 SATA 64GB
M2-S128 Accessory: M.2 SATA 128GB

 

Nodegrid Gate SR product SKUs

Product SKU Description
GSR-T8-BASE 8 RJ45 serial rolled, 1 GbE Ethernet, 2 SFP+, 4 GbE Ethernet with built-in switch, 4 PoE+ GbE Ethernet with built-in switch, 2 GPIO ports, 1 digital out port, 1 relay port, 2 USB 3.0 Type A, 2 USB 2.0 Type A, 1 HDMI port, 32GB iSLC SATADOM
GSR-T8-UPG1 8 RJ45 serial rolled, 1 GbE Ethernet, 2 SFP+, 4 GbE Ethernet with built-in switch, 4 PoE+ GbE Ethernet with built-in switch, 2 GPIO ports, 1 digital out port, 1 relay port, 2 USB 3.0 Type A, 2 USB 2.0 Type A, 1 HDMI port, 128GB iSLC SATADOM
GSR-PSU Accessory: 54VDC external 100-240 VAC, 50/60 Hz power adapter
PCI-WIFI-B Accessory: Mini PCI Wi-Fi
M2-CELL-C Accessory: M.2 Cellular 4G/LTE with dual-SIM
GSR-SATA Accessory: SATA Storage Expansion Kit (HDD/SDD not included)

 

Nodegrid Hive SR product SKUs

Product SKU Description
HSR-N8-BASE 1 RS-232 serial, 1 mini-USB console port, ext power, dual 1GbE Ethernet or SFP/vDSL, dual 10 Gbps cages for PON or SFP+, 4 10/100/1000/2.5 Gbps RJ45 with VLAN support, +12 VDC PSU w/regional AC cord options
CST-GEN-HSR-S 1 RS-232 serial, 1 mini-USB console port, ext power, dual 1GbE Ethernet or SFP/vDSL, dual 10 Gbps cages for PON or SFP+, 4 10/100/1000/2.5 Gbps RJ45 with VLAN support, +12 VDC PSU w/regional AC cord options, M.2 NVMe 128 GB SSD
CST-GEN-HSR-SW4G 1 RS-232 serial, 1 mini-USB console port, ext power, dual 1GbE Ethernet or SFP/vDSL, dual 10 Gbps cages for PON or SFP+, 4 10/100/1000/2.5 Gbps RJ45 with VLAN support, +12 VDC PSU w/regional AC cord options, M.2 NVMe 128 GB SSD, M.2 802.11ax Wi-Fi 6 dual-band, M.2 dual-SIM 4G LTE cellular
CST-GEN-HSR-4G 1 RS-232 serial, 1 mini-USB console port, ext power, dual 1GbE Ethernet or SFP/vDSL, dual 10 Gbps cages for PON or SFP+, 4 10/100/1000/2.5 Gbps RJ45 with VLAN support, +12 VDC PSU w/regional AC cord options, M.2 dual-SIM 4G LTE cellular
CST-GEN-HSR-5G 1 RS-232 serial, 1 mini-USB console port, ext power, dual 1GbE Ethernet or SFP/vDSL, dual 10 Gbps cages for PON or SFP+, 4 10/100/1000/2.5 Gbps RJ45 with VLAN support, +12 VDC PSU w/regional AC cord options, M.2 5G cellular
HSR-PSU Accessory: 12VDC external 100-240 VAC, 50/60 Hz power adapter
HSR-WMNT Accessory: HSR wall mounting kit

 

Nodegrid Link SR product SKUs

Product SKU Description
LSR-T1-Base 1 RJ45 serial rolled, 1 GbE SFP, 1 GbE Ethernet with PoE in, 2 GPIO ports, 2 digital out ports, 2 USB 2.0 Type A, 1 VGA port, 16GB SATADOM
LSR-T1-UPG1 1 RJ45 serial rolled, 1 GbE SFP, 1 GbE Ethernet with PoE in, 2 GPIO ports, 2 digital out ports, 2 USB 2.0 Type A, 1 VGA port, 128GB SATADOM
LSR-PSU Accessory: 12VDC external 100-240 VAC, 50/60 Hz power adapter
PCI-WIFI-B Accessory: Mini PCI Wi-Fi
M2-CELL-B Accessory: M.2 Cellular 4G/LTE with dual-SIM
LSR-SATA SATA Storage Expansion Kit (HDD/SDD not included)

 

How Enterprise Network Security Software has Evolved for the Edge

Enterprise Network Security Software.

Modern enterprise networks are no longer contained to a single building or LAN. They’re highly distributed, with branch offices, remote employees, and global data centers that communicate and work together. That’s why traditional enterprise network security software—designed for on-premises infrastructure and castle-and-moat protection strategies—often struggles to secure the edge.

The challenge of traditional enterprise network security software at the edge

For years, enterprise network security followed the castle-and-moat approach. All the enterprise’s valuable systems and data are kept on the internal network (a.k.a. the castle), and a firewall creates a security perimeter (a.k.a. the moat) around those resources. This is easier to do when everything is housed in the same location. This becomes challenging (if not impossible) when those resources are spread across large geographical and logical distances.

For example, organizations may have a hard time extending their enterprise security policies to users, devices, and applications that aren’t on the main network. That goes beyond remote workers to also include cloud platforms and remote edge data centers. Some teams overcome this challenge by creating separate policies, but then they’re left with the logistical nightmare of updating and maintaining these policies across many different systems and locations. Due to errors or negligence, inconsistent security policies can leave gaps in your network security coverage.

In addition, traditional network security requires all remote traffic to be backhauled through the main firewall for inspection, creating a network bottleneck. That means all network requests worldwide must travel to the central data center, even if the traffic is ultimately destined for remote or cloud resources. This added network load can cause latency, timeouts, and other performance issues for the entire enterprise.

Challenges like these led to the evolution of enterprise network security software for edge deployments.

How enterprise network security software has evolved for the edge

Edge computing is all about moving resources closer to the users, systems, and applications that need them. Enterprise network security software for the edge does the same thing—it places security policies and controls in the cloud or small regional data centers, so remote systems and users don’t need to be routed back to the central network. The leading solution for edge security is Security Service Edge, or SSE.

SSE rolls up multiple security technologies into one integrated, cloud-based platform. Traffic from the edge is routed through the SSE security stack using SD-WAN (software-defined wide area networking). If that traffic is bound for cloud- or web-based resources, it’s allowed to bypass the central network entirely. Zero Trust Network Access (ZTNA) ensures safe and secure access if the traffic is destined for resources on the enterprise network.

Let’s discuss the specific technology that makes SSE the best solution for edge network security.

Zero Trust Network Access (ZTNA)

Zero Trust Network Access allows remote users and systems to access resources on the enterprise network, similar to a VPN. ZTNA is more secure than VPNs because it only gives users access to one specific resource at a time. They cannot jump around the network without re-authenticating and re-verifying trust. That means the lateral movement of a compromised account is limited, with malicious actors needing to re-verify their identity repeatedly, increasing their chances of getting caught.

ZTNA gives edge users and devices seamless access to the enterprise resources they need while reducing the risk of remote connections. It allows you to apply zero trust security principles to your network’s edge to ensure consistent security across your enterprise.

Firewall as a Service (FWaaS)

Firewall as a Service delivers network firewall capabilities as a cloud-based service. Incoming and outgoing edge traffic is routed through the FWaaS instead of the physical firewall in the data center, reducing the load on the enterprise network. FWaaS solutions for SSE typically include features like:

  • ❖URL/IP filtering
  • ❖Intrusion detection and prevention
  • ❖Network monitoring
  • ❖Deep packet inspection (DPI)

A Firewall as a Service is entirely cloud-based, which means you don’t need to deploy any additional hardware to edge locations. This also makes FWaaS easily scalable, allowing you to protect new branch offices or add additional features with the click of a button. FWaaS delivers powerful firewall functionality to the edge without expensive hardware or network bottlenecks.

Cloud Access Security Broker (CASB)

A Cloud Access Security Broker allows you to extend your enterprise security policies to cloud resources and traffic. The CASB acts as a gatekeeper between your enterprise network and the cloud, enforcing zero trust policies on any traffic flowing between the two. In an SSE solution, the CASB performs many functions, such as:

  • → Analyzing the behavior of users and entities to determine if they’re trustworthy before allowing access to cloud resources. This is also known as User and Entity Behavior Analytics, or UEBA.
  • → Using firewall and antivirus technology to detect malicious software (malware) and block it from entering the enterprise network
  • → Using enterprise data governance policies to prevent data exfiltration, which is known as Data Loss Prevention (DLP).
  • → Discovering, identifying, and analyzing all the enterprise’s cloud resources to determine relative risk. This is known as Cloud Discovery.

The CASB is what an SSE solution uses to extend your enterprise security policies to remote and cloud-based systems. This allows you to maintain precise and consistent zero trust policies across your distributed infrastructure, so your edge doesn’t become a weakness in your defense strategy.

SSE is powerful because it combines a complete security stack into one cloud-based service. That means you don’t have to force your edge resources into the perimeter created by traditional enterprise network security software.

Connecting your edge to SSE solutions

There’s still one critical component that’s missing: the technology that connects your edge resources and traffic to the SSE stack in the cloud. The most reliable and efficient on-ramp to an SSE solution is SD-WAN technology. SD-WAN creates a virtual overlay network on top of your WAN hardware, which enables automation and orchestration of remote, edge traffic management. SD-WAN uses intelligent routing to automatically separate edge traffic destined for the cloud, allowing it to bypass your firewall and flow through your SSE stack instead.

For example, the Nodegrid SD-WAN solution from ZPE Systems allows seamless integrations with SSE solutions. Placing Nodegrid Services Routers in your edge locations creates an access on-ramp to SSE and provides powerful branch networking functionality.

Learn more about securing your edge with SSE:

→ Top Security Service Edge Use Cases & Benefits for Enterprises
→ Security Service Edge (SSE) Implementation Guide for Enterprises
→ SSE Magic Quadrant: Key Takeaways of the 2022 Report

Want to learn more about network security software?

Watch a free demo of Nodegrid in action to see for yourself how enterprise network security software has evolved for the edge. Or get in contact with us!

Contact us!

Comparing In-Band Management VS OOB Management

in band vs out-of-band management
In a previous blog, we discussed the differences between out-of-band (OOB) networks and out-of-band (OOB) management. An OOB network is a separate network used to manage, orchestrate, and troubleshoot the primary production network. OOB management is the term for the network management that occurs on the out-of-band network. This differs from in-band management, which takes place on the main network alongside production traffic.

In this blog, we’ll compare In-band vs out-of-band management and explain why modern enterprise networks need out-of-band.

What is In-band management?

In-band management is the network management that occurs on the same channel as data communications. Network administrators connect to the device they want to manage (e.g., a router, switch, etc.) using protocols like Telnet/SSH or SNMP. In-band management requires the administrator to connect over the primary LAN interface—or the WAN, for remote network management.

The in-band network management workflow must compete with production traffic for bandwidth since they use the same network architecture. In addition, if the primary LAN, WAN, or ISP experiences problems or goes offline, administrators lose the ability to connect to network devices for troubleshooting remotely. That means they need to physically connect to the serial ports on affected devices, which could be hundreds or thousands of miles away.

What is OOB management?

Out-of-band (OOB) management takes place on a separate channel known as an out-of-band network. This keeps management and orchestration workflows from adding latency to the production network. It can also provide a redundant connection to manage remote network infrastructure in case the primary WAN, LAN, and/or ISP goes down.

An OOB network may have its own LAN architecture, with a jump box (also known as a jump server) providing management access. This box connects to both the In-band and OOB network, so administrators can remotely connect to the jump server from the primary LAN and use it to access OOB management. Ideally, this secondary LAN is wholly isolated from the primary, with its own DNS, DHCP, and other critical network services. This will allow engineers to troubleshoot even if those services are unavailable on the primary LAN. However, administrators will be cut off if any of these services goes down on the OOB network.

Another approach to OOB management uses serial consoles (also known as console servers, serial console routers, serial console switches, or terminal servers). Serial consoles connect to the networking infrastructures via managed serial ports, giving administrators management access to many different devices from one centralized system. Unlike a jump box, serial consoles have a direct serial connection to the devices they manage, which means administrators can still view and troubleshoot this infrastructure even if critical network services are down.

An OOB serial console provides two or more network interfaces, so you can connect them to the primary ISP/WAN and a secondary network (such as a DSL, dial-up, or cellular connection). This secondary network acts as a failover if the primary goes down, giving engineers an alternative path to critical infrastructure. It also creates a dedicated out-of-band network for management and orchestration, leaving the production network free for critical business traffic.

Comparing In-band vs Out-of-band management

Many organizations still use In-band management simply because it’s easier and doesn’t require any extra hardware. To get out-of-band management, you must purchase, configure, and install dedicated hardware on top of your in-band infrastructure. However, while sticking with In-band management may save you some time and money now, it’s sure to cost you in the long run. In-band management negatively impacts the performance of the production network and doesn’t provide access to remote equipment if the primary LAN or WAN goes down.

In Band Management vs OOB Management
In band management OOB management
Management traffic creates latency on the production network Allows for complex management and orchestration workflows without impacting performance on the production network
Can’t remotely troubleshoot if the WAN or LAN goes down Provides an alternative path to critical remote infrastructure even if WAN or LAN services are unavailable
No additional hardware needed Requires additional hardware
Easy to set up May involve more complicated network configurations

Why you need OOB management

Modern businesses expect 24/7 availability of network resources. When an outage occurs, your engineers need to be able to quickly troubleshoot and restore services so you can keep your SLAs and avoid lost business. This is especially difficult when your critical infrastructure is housed off-site in remote data centers.

As your enterprise network grows in size, complexity, and geographic distribution, there is a need for greater automation and orchestration so engineers can keep up. Automation reduces the risk of human error, improving the network’s reliability and security.

However, complex network automation and orchestration workflows often require more resources and bandwidth. Running network automation tasks through In-band management creates performance issues on the production network, such as an increase in latency and dropped packets. OOB management is required if you want to take advantage of automation without negatively impacting the speed and reliability of your primary network.

When using In-band management, a WAN outage or remote equipment failure means wasting valuable time and money on truck rolls or on-site managed services. Out-of-band management gives network administrators a dedicated, redundant path to remote equipment so they can diagnose and fix issues without ever leaving the office. They can begin troubleshooting as soon as a failure occurs, allowing your organization to recover quickly and reducing the negative impact of an outage on customers and shareholders.

Learn more about In-band vs Out-of-band management

OOB management is superior to In-band management because it allows for resource-intensive network automation and orchestration without impacting production performance. OOB management also empowers network administrators to remotely troubleshoot and recover from outages, even if the primary WAN or LAN is offline.

Read more about OOB management:

→   How to Choose Secure Out-of-Band Management
→   Why Out-of-Band Remote Access is Critical for Branch Networking
→   Why You Need a Next-Gen OOB Console Server

Want to learn more about In-band vs Out-of-band management?

Contact ZPE Systems at 1-844-4ZPE-SYS to see a live demo of how Nodegrid OOB management solution makes OOB easy to deploy on top of existing infrastructure, with hardware/software that help automatically configure networks, and more.

Contact US

What is a Serial Console’s Role in Modern Enterprise Networks?

what is a serial console

Serial consoles have been used to manage business networks since the 80s, but things have changed significantly since then. What is a serial console’s role in modern enterprise networks? In this blog, we discuss the history and evolution of serial consoles as well as the exciting functionality provided by the latest generation.

What is a serial console?

A serial console—a console server, terminal server, serial console router, or serial console switch—is a networking device used to manage other devices. It connects to servers, switches, routers, and other equipment using the serial port (hence the name). Network administrators can then use the serial console to access all connected devices in the data center, server room, or network closet in which it’s installed.

Serial consoles allow admins to manage critical infrastructure without needing to log in to each separate device individually. A serial console also provides out-of-band (OOB) management, creating a completely separate network that’s dedicated to infrastructure management and troubleshooting. OOB management allows you to remotely troubleshoot, monitor, and administer your infrastructure, and more.

How serial consoles have evolved over time

A basic serial console—also called a Generation 1 serial console—provides consolidated remote access to critical infrastructure. It uses a secondary network connection (such as a dial-up modem or cellular SIM card) so admins can control and troubleshoot equipment without relying on the main production network. Using a Gen 1 serial console, admins can access each connected device’s CLI (command line interface).

Gen 1 serial consoles are relatively limited in control, security, and automation. For example, many Gen 1 serial consoles can only manage devices from the same vendor (or a small pool of supported manufacturers). A Gen 1 serial console also lacks in-depth security features like hardware encryption, and generally can’t integrate with third-party Zero Trust Security policies and controls. Plus, most Gen 1s completely lack automation capabilities, or limit you to basic CLI scripts for single tasks.

Gen 2 serial consoles

Frustration over these limitations led to significant advancements in the second generation of serial consoles, or Gen 2. With Gen 2 serial consoles, admins get more control, added security features, and expanded automation capabilities.

For instance, most Gen 2 consoles offer management functionality for third-party devices. These serial consoles also have some built-in security features like Trusted Platform Module (TPM) and frequently support advanced authentication methods like AD/LDAP, Kerberos, and RADIUS. Gen 2 serial consoles also allow for greater automation using Python scripts, APIs, and zero touch provisioning (ZTP).

While Gen 2 serial consoles offer more multi-vendor support than their extremely limited predecessors, they still fall short of true vendor neutrality. For instance, managing third-party and legacy devices often requires expensive adapters or complicated configuration tweaks. Many Gen 2 serial consoles also lack support for Zero Trust integrations such as SAML 2.0 (e.g., Okta, Ping, DUO), making it impossible to completely secure your out-of-band network.

Finally, while Gen 2 serial consoles introduce more automation capabilities, their closed architectures make it impossible to implement end-to-end NetDevOps automation. For example, you might only be able to use one specific scripting language or an approved set of playbooks. It’s also common for Gen 2 serial consoles to only support ZTP of connected devices from the same vendor, so you’re either limited in your automated provisioning capabilities or your choice of infrastructure solutions.

Gen 1 serial consoles provide remote, out-of-band management of multiple devices using CLI commands and scripts over a serial connection. Gen 2 evolved to incorporate more devices, more security features, and more automation capabilities. However, the serial console needed to develop even further to handle the needs of a modern enterprise network.

What is a serial console’s role in modern enterprise networks?

Today’s enterprise network is larger, more complex, and more distributed than Gen 1 serial console developers could have possibly imagined. Network administrators and engineers need to monitor, manage, and troubleshoot infrastructure devices from many different vendors in many different locations. Networks are also constantly threatened by cybercriminals using sophisticated hacking techniques and state-of-the-art malware. Plus, modern businesses must ensure near-constant availability and optimal network performance to stay competitive. Gen 1 and Gen 2 serial consoles simply can’t deliver the control, security, and resilience required by enterprise networks today.

The new Gen 3 serial console addresses older generations’ limitations through true vendor neutrality, multi-layered zero trust security, and end-to-end automation capabilities.

Total infrastructure control

Gen 3’s complete vendor neutrality makes it possible to extend your automation capabilities—including zero touch provisioning—to every physical and virtual asset in your environment, regardless of manufacturer. Gen 3 serial consoles also give network administrators a virtual presence in remote network locations (like data centers and branch offices) through which they can monitor environmental conditions in the rack, power-cycle and enter the BIOS menu of devices, manage power load distribution, and more.

This control is delivered via high-speed OOB (such as a 5G/4G cellular SIM card), giving you 24/7 remote access to critical enterprise infrastructure, even during an ISP outage. Plus, Gen 3 serial consoles use centralized cloud management, which means engineers can manage and troubleshoot remote infrastructure from anywhere, anytime.

A Gen 3 serial console is based on an open architecture, x86 OS, that supports integrations with your choice of infrastructure solutions, cloud services, and automation toolkits. It also includes flexible port configurations and legacy pinouts to control a variety of devices, such as PDUs, IPMI devices, and environmental monitoring sensors.

Comprehensive security

On a hardware level, Gen 3 serial consoles use features like encrypted disks, UEFI secure boot, and TPM 2.0 to ensure unauthorized users can’t access management functionality. Additionally, the OS is frequently updated and patched against new security vulnerabilities before they can be exploited. The Gen 3 serial console also automatically checks the integrity of all newly integrated hardware and software to ensure there are no backdoor vulnerabilities.

A Gen 3 serial console’s vendor-neutral platform supports easy integrations with a variety of zero trust security controls. For instance, you can manage user access to a Gen 3 serial console through third-party Identity and Access Management (IAM) solutions, allowing you to follow zero trust best practices like 2FA, SSO, and dynamic trust verification. A Gen 3 serial console can also integrate with on-premises and cloud-based network security solutions such as next-generation firewalls (NGFW), Secure Access Service Edge (SASE), and Security Service Edge (SSE).

A Gen 3 console includes robust onboard security features, which reduces the risk of an attacker using a stolen serial console to access your management network (and ultimately, your production systems and data). Its open architecture also enables integration with zero trust security controls and providers.

End-to-end automation

The open architecture of a Gen 3 serial console makes it possible to integrate with your choice of infrastructure automation and orchestration tools, or directly host VMs and Docker containers so you can run your own tools. With a Gen 3 serial console, you can use solutions like Ansible, Chef, Puppet, or Kubernetes to automate deployments. You can also use any API you want to automate any workload you need to, no matter how complex.

Gen 3’s advanced automation capabilities enable full pipeline automation so you can achieve NetDevOps transformation. Gen 3 serial consoles also facilitate immutable infrastructure, allowing faster and more agile deployments, updates, and replacements of critical network resources.

With a Gen 3 serial console, you can create a fully-automated network environment. This allows engineers to work more efficiently and reduces the risk of human error causing an outage or security breach.

Nodegrid Serial Console Plus (NSCP)

A Gen 3 serial console, like the Nodegrid Serial Console Plus (NSCP), gives you complete remote control over every component of your network infrastructure, regardless of location or manufacturer. Nodegrid also secures your OOB management network using zero trust security best practices and comprehensive onboard features. Finally, the Gen 3 NSCP allows you to automate whatever tools you want to use, so you can efficiently manage a complex enterprise network without sacrificing speed, security, or control.

 

Learn more about Gen 3 serial consoles:

→   Comparing the Best Console Servers for Data Centers in 2022
→   What Makes a Gen 3 Serial Console?
→   Why You Need a Next-Gen OOB Console Server

What is a serial console’s role in modern enterprise networks?

Schedule a demo of the Gen 3 Nodegrid Serial Console Plus to see for yourself!

Demo

How to Use a Cloud Managed Gateway Router to Optimize OT Automation

cloud managed gateway router

The right cloud managed gateway router simplifies edge network management and unlocks remote access to operational technology (OT). In this blog, we’ll explain what OT automation is, how to manage it with a gateway router, and what to look for in an ideal solution.

What is operational technology (OT)?

Operational technology, or OT, controls equipment interacting with the physical world. The term is used to differentiate these systems and devices from information technology (IT), focused on non-physical data computing.

OT manages the physical equipment used for industrial manufacturing, water and energy utilities, medical procedures, building management, and other physical processes.

Some examples of operational technology include:

  • Programmable logic controller (PLC) – Controls assembly lines, industrial machines, robotic devices, and other manufacturing processes.
  • Supervisory control and data acquisition (SCADA) – A control system for high-level supervision of industrial machines and processes, including PLCs.
  • Building management system (BMS) and Building automation system (BAS) – manage a building’s mechanical and electrical equipment such as lighting and HVAC.

OT facilitates industrial automation, by reducing manual intervention required to control and optimize physical technology. OT automation systems are traditionally isolated from IT networks, running on specialized industrial computers. However, modern OT systems are converging with IT to allow operators to manage them via network-connected PC or even from a cloud platform.

Using a cloud managed gateway router to optimize OT automation

Frequently, OT devices operate outside your main headquarters, in remote facilities such as factories, warehouses, data centers, and branch offices. In the past, that meant you needed operational technology installed at each location, with operators on-site to monitor OT automation computers. However, IT/OT convergence enables you to connect operational technology to edge network gateway routers, facilitating remote control via specialized software or a cloud-based application.

Gateway routers connect remote facilities to WAN or SD-WAN architectures, providing seamless and secure access to enterprise network resources. They also provide administrators with access to monitor and manage edge network routing and security. Some gateway routers also function as serial console routers, which means they can be used to directly manage the devices connected to them—including operational technology. A cloud managed gateway router with serial console capabilities gives administrators the ability to control remote networking and OT systems anywhere.

One of the issues with remote OT automation is that it may consist of several different systems and applications. For example, a managed service provider (MSP) may need to control HVAC, power distribution, security systems, and other infrastructure for many different clients using a variety of OT computers. They may even have some old analog gauges in place which they monitor with a cheap IoT camera.

Each of these disparate OT systems has its own application or cloud portal that operators must learn, configure, and manage, which is inefficient and creates risk of human error. A vendor-neutral cloud managed gateway router can solve this problem by bringing all your OT applications together under one unified platform.

What to look for in a cloud managed gateway router

Not all cloud managed gateway routers are optimized for OT automation. Let’s examine what an ideal solution looks like.

★ Hardware

The gateway router itself should use high quality hardware, and it should integrate with high quality operational technology hardware as well. You should secure the router hardware with features like cryptographic modules and geofencing to prevent tampering if the devices are stolen or intercepted in transit. A vendor neutral gateway router also needs to support various hardware connections such as RS-232, RJ-45, USB, and IPMI so you can ensure compatibility with your various OT systems, including analog and IoT solutions.

★ Operating System

The OS that runs on the cloud managed gateway router should be hardened and frequently patched to prevent hackers from exploiting vulnerabilities. The provider will update an ideal solution, so you don’t have to constantly stay abreast of all new security vulnerabilities or keep on top of the vendor’s patch schedule. A vendor neutral gateway router should run on an open, Linux-based OS to allow easy integrations with OT software.

★ Zero touch provisioning

Zero touch provisioning (ZTP) allows you to automatically deploy device configurations over a network connection. A cloud managed gateway router should have ZTP capabilities both for itself and for other connected devices. This eliminates the need for pre-staging so that you won’t risk a configured device falling into the wrong hands during shipping. It also reduces the need for engineers to travel on-site to install and configure new devices, saving time and money.

★ Connectivity

The gateway router’s primary job is to provide remote systems and users with a reliable connection to the enterprise network, ideally using SD-WAN technology. It should also provide a dedicated out-of-band (OOB) management connection, so administrators have reliable access to control and troubleshoot the remote network. An ideal solution includes high-speed failover via 4G/5G to ensure seamless connectivity for both administrators and end-users.

★ OOB provisioning and management

Provisioning and changing device configurations over the production network is risky. There’s always the chance that a configuration mistake could take the whole network offline. That’s another reason why a cloud managed gateway router should provide an OOB network connection, so you can deploy and modify device configurations without affecting the production network.

★ Orchestration

A cloud managed gateway router should provide orchestration so you can coordinate automated tasks and workflows across all your OT systems. This brings all OT applications together behind one pane of glass, facilitating efficient management and powerful optimization. End-to-end OT automation at the edge is only possible with a truly vendor-neutral gateway router that supports integrations with your choice of OT solutions, automation tools, and scripting languages.

A cloud managed gateway router with these features will empower efficient OT automation at the edge.

Why choose the Nodegrid cloud managed gateway router solution?

The Nodegrid line of cloud managed gateway routers delivers powerful edge network management optimized for operational technology automation. Features like secure zero touch provisioning and gen 3 OOB management support efficient and low-risk operational technology deployments while ensuring constant availability. Nodegrid’s vendor-neutral hardware, operating system, and cloud-based management platform can integrate all your OT solutions for true end-to-end orchestration.

Learn more about edge network orchestration:

→  Simplifying Network Edge Orchestration with a Single Platform
→  Edge Computing Trends to Expect in the Post-Covid World
→  Out-of-Band Is a Lifesaver for Critical Edge Networking. Here’s Why…

Learn more about the Nodegrid cloud managed gateway router.

Call 1-844-4ZPE-SYS or  Contact us online!

Contact Us